Transparent LED displays are becoming more and more widely used in various industries and are favored by many leading companies. In the process of using this new technology product, you may encounter various problems. Luxmage will guide you in assembling and using transparent LED screens, please refer to.
.jpg)
1. Working environment temperature range -20℃t≤50℃, working environment humidity range 10%~90%RH.
2. Avoid using or storing the display in high temperature, high humidity, acid and alkali salt environment during use.
3. Keep away from flammable objects, gases and dust.
4. When the ambient temperature is too high or heat dissipation conditions are not good, take care not to use the transparent LED screen for a long time, it is easy to burn the board inside the screen.
5. When the humidity of the transparent LED display exceeds the humidity specified in the power supply, the components will corrode or even short-circuit, causing permanent damage.
6. It is strictly prohibited to let water, iron powder, metal objects and other easily conductive things into the screen. Transparent LED display should be placed in the least dusty environment. Too much dirt will affect the display performance and easily damage the circuit. If water enters for any reason, please turn off the power immediately and wait for all parts to dry before using.
7. When using the display infrequently, turn on the display at least once a week for 2 hours each time.
.png)
1. When opening the screen, pay attention to the switching order: first turn on the power, wait for the screen to light up and warm up, then open the screen. When the screen is turned off, the order is reversed: first turn off the screen, and then turn off the power. If the device is turned off first, the screen will become brighter, the tube light is easy to burn, affecting the life of the screen, leading to many serious consequences.
2. Each time the power on and off time does not exceed 5 minutes, frequent shutdown will reduce the life of the screen, resulting in a short circuit screen.
3. The computer can be turned on after entering the engineering control software.
4. Avoid turning on the screen when the screen is all white, because at this time the system starts the maximum current.
5. When the ambient temperature is too high or heat dissipation conditions are not good, LED should be careful not to open the screen for a long time.
6. If the electronic display in some places appear very bright lines, should promptly turn off the screen. In this state, the display should not be open for a long time.
7. The display power switch often action, at this time should pay attention to check the screen or timely replacement of the power switch.
8. Regularly check the stability of the suspension, if there is loose, should be adjusted, reinforced or update the suspension system components in a timely manner.
9. According to the environmental conditions of the display, avoid insect bites and use insecticides when necessary.
.png)
The above are the precautions when using transparent LED screen, if you need technical support, you can contact Luxmage at:
Hot news
Project Reference
Posted by: Admin - Date: 07-01-2023
